Pony Wall Workbench

easy to build workbench

Do you want kitchen cabinet style functionality in your garage, but don’t want to take the time and money to build kitchen cabinets?

We just built a new workbench with a new method – we call it the “pony wall method” – and in this post, we’ll share with you how and also the plans so you can build it too.

Why We Love It

There’s alot of different ways of building workbenches, here’s why we love this way and this workbench:

  • Spacious drawers at waist height (instead of bulky framing)
  • Toekick elevates the bottom shelf and allows user to stand closer to workbench top
  • Fully enclosed base is easy to clean around
  • Treated wood for the base is good for garages and will hold up to potentially wet conditions
  • Inexpensive and easier to build compared to other methods of building
  • Designed to work on uneven garage floors
  • Easy to add a chop saw
  • 16 feet overall length supports cutting on either side of the saw
  • Easy to modify in length and width
  • Can make any length you want (plywood is limited to 8′ runs)

How We Built It

We had some leftover 2x framing boards, so we tried out a new way of building the same ole same ole –

easy to build workbench easy to build workbench

Basically, you build three pony walls.  You set the first one on the floor and level it up and screw it to the wall behind.

easy to build workbench

Then you set the second pony wall at the back and screw it to the bottom one.

​​​​easy to build workbench

Then you set the third pony wall on the front, so this gives you a toekick and the front of your workbench.

​​easy to build workbench

Then you screw plywood down in between the frames to create the floor, and on the ends to enclose it.

​​easy to build workbench plans

You can just add a top at this point, or you can set a chop saw in it too.

miter saw in workbench

Just cut the framing out where you want to add the chop saw,

miter saw in workbench

And screw to the sides, place the scrap plywood on top and set the miter saw.

Compact Sliding Miter Saws

In this plan, you need a miter saw that will work with 24″ of cabinet depth.  I put together a list of sliding miter saws that don’t need rear clearance here, or you can use a chop saw that does NOT slide.

installing drawer slides in workbench

On to the drawers – just attach to the frames (no, you don’t need to attach in the middle, just get the three screws in somewhere)

building a garage workbench

And slide the drawers in.

diy garage workbench with drawers

    Video Tutorial

    Watch us build the pony wall workbench in this video

    Please Pin!

    If you have a second to pin, please use this image.  Pinning helps us get the word out about new plans, and helps us keep up with website maintenance and server expenses.  We very much appreciate the support.

    workbench with drawers easy to build